[Chinese Packaging Network News] vacuum packaging machine use.
1: Before use, the vacuum packaging machine should be placed steadily to see if the cover is smooth and it will automatically jump after loosening; equipped with the power supply to meet the model requirements; check the position of the vacuum packaging machine vacuum pump oil surface is correct, if not correct should be adjusted (See the vacuum pump instruction manual for details); ground the unit well; turn on the power, turn on the power switch, and close the cover to see if the vacuum pump is operating properly.
2: Before use, we need to make the following adjustments: We have to choose vacuum, because the vacuum packaging machine pumping time, digital display, continuous adjustable, small vacuum packaging machine pumping time is digital rotary type 0-30 seconds adjustable. Adjust the length of the pumping time so that the desired degree of vacuum is achieved. Select the heating temperature, select the desired heating temperature according to the packaging bag material, and adjust the heating temperature knob to the corresponding position. Adjust the heating time, heating time, digital display, continuously adjustable, according to the packaging materials used and heating temperature, adjust the heating time knob, select the appropriate heating time. According to the need to select silicone rubber sealing strips, set the sealing date and other characters.
3; Note when using: Turn on the power switch; Turn the bagging strip open, put the packaged bag into the work room, place the sealing place flat on the silicone rubber strip, the bag should not overlap, turn over Press the packaging bag to press the mouth of the bag well; (or press the edge of the cover) press down on the studio and close the cover. The machine will automatically complete the vacuum packaging process according to the procedure and automatically open the cover. Some devices are equipped with emergency stop switches. Open the vacuum cover, take out the bag, and complete a work cycle; when you stop working, you need to turn off the power switch, pull out the power plug, and do the safety first.