The method for identifying the intrinsic quality of furniture is as follows:
1. Observe the advantages and disadvantages of wood : Open the furniture cabinet door and drawer to observe whether the wood is dry, white, and the texture is tight and delicate; the inferior wood or yellow heartwood and other materials are not only yellowish brown, but also very soft wood.
2. Observe the presence or absence of defects in the wood : the main force part of the furniture is framed, and the load-bearing horizontal strips connecting the columns near the ground should not have large knots, cracks and cracks.
3. Observe the strength of the board surface : the strength of the board surface can be pressed by the finger to feel the fastness of the board surface. The surface material should be fixed with a well-shaped skeleton. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. . The bottom of the drawer can be pressed by hand to test the strength.
4. The skirt should be protected : the furniture with various veneer materials should be protected from the skirt near the ground, otherwise a 3mm thick Pauli board may be kicked by the toe. Under the back of the hand, close the ground and flip the hand to the inside to touch, whether or not a horizontal bar is added.
5. Accurate size and styling : Check whether there is any drawer or door frame tilting, whether there is any slanting of the eye position or the eye hole is too tight, and the position caused by the process level is skewed.
6. Structural requirements of the main dimensions : the width of the supporting column and the base of the cabinet should be no less than 45mm-50mm and the thickness should be 20mm-22mm. The width of the horizontal strip of the cabinet for three weeks should be 25mm-30mm, and the thickness can be 20-22mm.
Marble Chopping Board,Cutting Board,Wheat-Straw Cutting Boards,Chopping Board
Yangjiang Yado Kitchen Industry Co., Ltd. , https://www.yadokitchen.com