[ Chinese wardrobe network ] Many families just caught up with the damp weather when they renovated the house. The decoration is a big project and many people can't stand the moisture. What should I do at this time? Different wardrobe materials have different tips. The following small series will introduce a few tips for everyone!
1. Method of facing wet weather
For families that have already been renovated, especially during the wet season, you should pay attention to moisture. First of all, in the case of wet weather, try not to open the south window, because the air flow in the south is warm and humid. Second, the weather should be wet and should not be ventilated, especially when the outdoor environment is humid, the window should be opened less or the window should not be opened. When the sun is out, open the window and ventilate. In addition, in the corners, closets, moisture-absorbing boxes, activated carbon and other dry items are moisture-proof, and the effect is limited. Drying equipment can be used to raise the indoor temperature to remove moisture. Such as electric heaters commonly used in winter. It is also possible to use the dehumidification mode of the air conditioner and the dehumidifier to remove moisture.
2, the moisture-proof method of different wardrobes
Wooden Wardrobe: The main point of the wooden wardrobe is to keep its luster. It can be evenly applied to the surface of the wardrobe with a special cleaning agent or protective wax.
Artificial board wardrobe: If the sealing edge is not good or damp, it is easy to cause swelling or damage to the wardrobe board due to water absorption. Therefore, the wardrobe of artificial board should be waterproof when starting to use, and a layer of waterproofing is added to the part that is easy to absorb water. Pad or do a good job of closing.
Leather Wardrobe: The leather of the leather wardrobe will be cold and hard after being damp, and the surface of some corners will be prone to mildew, and even some wardrobes will be deformed or faded after being damp. After dust removal and mildew removal, the surface should be coated with leather-made oyster sauce, leather oil, etc. The leather sofa can be placed underneath with some desiccant to keep it dry.
Cloth Wardrobe: Cloth wardrobe is moisture-proof. Use a special vacuum cleaner to absorb the dust on the surface. In the south, you can use the low-end hot air of the air duct to blow the sofa, which helps to remove the moisture inside the sofa.
Metal wardrobe: This kind of furniture should be wiped with a dry rag on wet days. If there is rust, use a dish cloth or toothbrush with rust inhibitor to clean it, then polish it with a dry cloth.
Flat Hospital Bed,Folding Hospital Bed,Foldable Medical Bed,Stainless Steel Flat Bed
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalsupplier.com