The authors found that for consumers who are planning to use geothermal heating, the environmental performance and thermal conductivity of wood flooring are two of their most important indicators. It is generally agreed that wood flooring, especially for geothermal wood flooring, is in a state of high temperature "baking" for a long time, which inevitably accelerates the emission of harmful gases. In addition, many people think that "the thermal conductivity of wood flooring is not as good as ceramic tiles." Whether this statement is true or not is a major concern.
Regardless of the type of heating used, the best thing to do is to try not to turn off the heating. If this is the case, there will be a difference in the heat transfer speed at the beginning of use, and there is no difference in normal use. Moreover, the thermal conductivity of the wooden floor is not as good as that of the floor tile, which just ensures that its heat dissipation speed is also slow, so from the overall point of view, the geothermal heating uses wood flooring or floor tiles, and the effect is not much different.
Whether it is paving solid wood flooring or laminate flooring, try not to lay it on rainy days. Because the air is wet in the rainy days, the ground is damp, the water evaporates slowly, and the glue dries slowly. In this case, the wooden floor is paved, and it will be prone to deformation or hollowing in the future, especially on the first floor. . In the cloudy days where the air humidity is not very large, it is possible to lay the wooden floor, but it is very important to check the moisture content of the floor. Generally, the laminate flooring and the solid wood composite floor can meet the requirements, while the solid wood and bamboo flooring must be checked, otherwise it will be winter. The interior is dry and heated, and the floor will be too thick.
After passing the inspection, be sure to put the floor into the original packaging and wrap it in plastic cloth, otherwise the floor will absorb the humidity in the indoor air and deform. When paving wooden floors on a cloudy day, the owner should pay attention to remind the decorators to make the paving compact. Otherwise, the weather will be clear, and the water will be evaporated, which will cause the wooden floor to shrink and the gap between the floors to increase.
At the same time, we should also pay attention to the following points: the base level must be smooth, dry, and the ground should be sprinkled with insect-proof powder on the ground, and then a layer of moisture-proof cloth should be placed; the paved keel must be dried, and the moisture content is less than or equal to 15%. The keel or the splint (the splint should be sawn to a size of no more than 600×600mm, and a gap of 5~10mm should be left between the splints) plus a layer of moisture-proof cloth to achieve double protection to prevent moisture intrusion. The floor is made of 18mm thick. When paving, the floor and the surrounding walls are separated by 8-10cm. The joint between the floors can be fixed with special waterproof floor glue or straight nails. All floor splicing should be longitudinally misplaced for paving; it is recommended that each piece of floor splicing be tapped with rafts and wooden slats so that each floor of the male and female shackles is tightly closed, and the glue overflows the interface, after drying Gently shovel the excess glue that has leaked out. If the amount of glue is insufficient, it will not overflow the surface, and there may be sequelae such as cracks, unsealed interfaces, and insufficient moisture resistance.
Roller Conveyor line is a common continuous conveying equipment, because of its obvious advantages, so that it can not only connect the production process, but also directly involved in the production process, so in the electronic, electrical, pharmaceutical, chemical, hardware, food, beverage, textile, building materials industry and all kinds of logistics transportation, especially in various processing, assembly, packaging, storage and other pipeline has been widely used.
Roller conveyor is applicable to all types of boxes, bags, trays and other pieces of cargo transport, bulk materials, small items or irregular items need to be placed in the tray or container for conveying. Can transport single piece weight of a large material, or bear a larger impact load, easy connection between the roller line filter, can be used more than one drum line and other transport equipment or special plane to form a complex logistics system, to complete various process needs. Can be used to achieve the accumulation of material stacking conveyor. Roller conveyor is simple in structure, high in reliability, easy to use and maintenance.
Roller Conveyor
Roller Conveyor,Flexible Roller Conveyor,Industrial Roller Conveyor,Roller Belt Conveyor
Shandong Sinolion Machinery Corp., Ltd. , https://www.sinolion.cc