The strict regulations of children's furniture standards will directly affect all aspects of furniture manufacturing, including the selection of raw materials such as paints, textile fabrics , leather , plastics, and plates. The physical and chemical properties of raw materials and environmental protection indicators directly affect the quality of children's furniture. The choice of raw materials determines whether the requirements of the standard are met.
It is understood that in 2011, children's toys were spot-checked, and the quality of spot checks was not satisfactory. Originally, children's furniture has always been based on adult standards. In the case of sampling with reference to adult standards, the product qualification rate is still unsatisfactory. If it is in accordance with general technical conditions, it will be sampled. If you pass, the pass rate is definitely lower. Children's furniture products that are currently circulating in the market are strictly unqualified. Hai Lingchao, director of the National Furniture Product Supervision and Inspection Center, deliberately listed many recalls in the field of children's furniture in recent years to illustrate the need for children's furniture standards to be legally high. At the same time, many domestic famous brands also failed. .
It is reported that the "General Technical Conditions for Children's Furniture" focuses on the structural safety of children's furniture.
"Architectural safety" stipulates that the product should not be dangerously sharp and sharp, and the edges and edges should be rounded or chamfered. The standard adds clear rules for the edges and tips, protrusions, holes and gaps, folding structures, flaps, etc. of children's furniture products to prevent harm to children. In order to prevent children from hiding in the furniture for too long and suffocating, the cabinet-type closed furniture used by children must have a certain ventilation function, and the cover, door, etc. cannot be automatically locked.
Increase the warning sign: The standard stipulates that the age range and other required safety warning signs of the product should be clearly specified on the children's furniture products or in the instructions for use, and the terms of the warning signs are standardized. For example, if the product needs to be installed, the warnings should be marked in the instructions for use: “Attention! Only adults can be installed, children should not be nearâ€; if the product has folding or adjusting device, “Warning! Be careful of pinch†should be marked in the appropriate position of the product. Warning words; if it is a swivel chair with lifting pneumatic rods, the warning words “Danger! Do not frequently lift and play†should be marked in the appropriate position of the product. The safety warning fonts such as “Dangerâ€, “Warning†and “Attention†in the warnings are not less than the black number on the 4th, and the warning content should not be less than the 5th bold type.
Refined appearance requirements: The new national standard refines and clarifies the appearance requirements of children's furniture inspection, and has detailed requirements on the appearance of wooden parts, the appearance of metal parts, the appearance of soft parts, the appearance of plastic parts and the appearance of coatings, such as requirements. The exterior of the wooden piece shall be free of decaying materials, and the slightly decayed area of ​​the inner surface shall not exceed 20% of the area of ​​the part.
Good mechanical properties: After the standard test stipulates the mechanical properties test of children's furniture, the parts should be free from breakage, cracking or falling off; there is no serious impact on the wear or deformation of the function; there should be no permanent looseness when pressing the firm parts by hand; No looseness; drawers, doors and other movable switches should be flexible; hardware should be free from obvious deformation, damage and falling off; soft furniture fabrics are not damaged, no springs, no sewn edges, no material to be damaged or displaced; There should be no tipping over. In addition, the standard also stipulates that glass components can be used at a height of 1.6 m from the ground or the height of the child.
The new national standard also lists the limits of hazardous substances, allowing the test to be based on evidence, and also allows consumers to understand the environmental requirements and standards of children's furniture more clearly, intuitively and in detail.
The industry generally believes that if the "General Technical Conditions for Children's Furniture" can be promoted and strictly implemented in the market, it will play a stable and healthy development role in the children's furniture market. Once the children's furniture market is stable, it will attract more brands to enter. To form a benign competition, the price will naturally fall back.
According to industry experts, the implementation of the new standard can regulate the market, and the industry will be thoroughly reshuffled, so that some local low-quality, small-scale enterprises will be eliminated in the reshuffle, and the market will be purified. At the same time, foreign brands are likely to enter the domestic market in a big way, which will further promote product technology.
Usage: Household, Washing Dish, Kitchen, Car,Bathroom, Pet and More.
Easy to make foam-with a little detergent he will produce a lot of foam.Bump design-anti-slip particles inside the glove.
Hook design-glove are easy to store and drain to avoid bacterial growth.High temperature resisitance-the glove are heat resistance to 220 degrees and can be sterilized by boiling water.
Silicone Gloves
Silicone Mitts,Silicone Oven Mitts,Silicone Oven Gloves,Silicone Cooking Gloves
YANGJIANG SHENGHAI INDUSTRIAL&TRADING CO., LTD , https://www.shenghaiyj.com