[ Chinese wardrobe network ] With the gradual change of people's consumption consciousness, the understanding of Furniture collocation is also changing day by day, people began to pursue more convenience and benefits.
In daily life, the whole wardrobe sliding door is very common in our daily life, and what problems will the whole wardrobe sliding door installation encounter in daily life?
1. Overall wardrobe sliding door installation problem
1. Does the drawer affect the sliding door installation?
Since the sliding door is in contact with the wall or the sides of the cabinet, there is no other object in the contact position to block the closing of the sliding door.
For example, the position of the drawer in the cabinet should avoid the intersection of the sliding door and be at least 1cm higher than the bottom plate; the drawer in the folding cabinet should be at least 15cm away from the side wall.
2. Why is the sliding door installed?
Regardless of the floor on which you make any material, you must ensure that the walls of the door are horizontal and vertical. Otherwise, the door will be skewed after the installation is completed. The adjustable error is no more than 10mm.
3. Is the first striker or the sliding door?
Do not install the corner line in the installation position. The plaster line can be installed on the sealing plate above the wall cabinet. If the door is directly to the top, do not install the plaster line.
4. Must the carpet be taken before installation?
A carpet of less than 5 mm thickness will be cut off from the carpet at the location and directly attached to the lower rail. Carpets with a thickness of 5 mm or more can be directly attached to the carpet with screws.
To install the monorail, the carpet at the location must be cut off, and the 3-5 mm thick wooden strip is placed in advance on the carpet so that the monorail can be directly attached thereto.
2. Overall wardrobe sliding door installation steps
1. Distinguish and clean the main parts of the sliding door and the installation position. It is necessary to distinguish the sliding door upper and lower track boxes here.
2. The general E-shaped track box on the market is above, using screws and other hardware accessories, fixed on the upper end of the wardrobe, and the surface level of the wardrobe.
3. The track box like the flat plate is the lower end, which is fixed about ten millimeters from the cabinet surface, and the moving door is put in. In the final step, just use a six-grip wrench to adjust the height of the hole wheel to level the surface of the wardrobe.
Baking Set,Kids Baking Set,Nonslip Silicone Kids Baking Set,Silicone Baking Set
vchomy , https://www.jsvichen.com