Paste mixes Omido

All along, corrugated cartons manufacturers are pursuing faster production speeds and higher board quality. In order to achieve this goal, the quality of starch paste is very important. In order to improve the quality of paste, the glue production department has made unremitting efforts to continuously improve the paste formulation and deployment technology. The lack of professional technical guidance for preparation of folk workshop glue is just to mix together a bunch of raw materials to produce a sticky substance. This approach may still work now, and some companies are also satisfied with the status quo - but only now.

Normal >

Normal > The Starch Preparation Systems provided by Alliance Machine Systems Europe BV have been quality certified and are divided into two different models - Multimix and Giromix . The Multimix system has a production efficiency of 3000 kg / hr, while Giromix has a production efficiency of 3600 kg / hr. Both systems can be upgraded to achieve higher production efficiency (up to 4300 kg / h and 5270 kg / h, respectively). This upgrade can be completed when the customer places an order, or it can be performed on the customer's factory floor in the future. As the preheated water is used, the preparation time for each batch of glue is greatly reduced, and the work efficiency of the above two systems is also greatly improved. If a reinforced design (using double buckets) is used, it means that the first batch of paste can be pumped into the second mixing bucket after processing, and at the same time, the next batch of glue can be prepared in the first bucket. , This can shorten the deployment time per batch, thereby further improving the production efficiency. By combining the two methods, the maximum productivity of the two systems can reach 5,350 kg / h. Both combinations can be flexibly selected for each batch of paste that can be processed, ranging from 600 kg / hour to 1200 kg / hour.

Normal > Because the carton manufacturing enterprises have higher and higher requirements on the quality of glue, the requirements for uniformity of different paste concentrations are also increasing. One way to increase the consistency of the paste is to use liquid additives. The above two paste preparation systems all have three different injection systems for the addition of liquid additives, which the user can select flexibly according to different needs. All additions can be controlled through a fully integrated software system. The user can also add a small amount of bio-insecticide or anti-foam agent through a measurable volume feed pump in each batch of paste as needed. In the production of special cardboard, it is also possible to add waterproof resin to mass-produced pastes – the accuracy of this system is ± 0.3% . At the same time, the company can also provide a highly accurate spray device, Liquid Borax , with a precision of ± 100 grams, eliminating the need for manual operation.

Normal > For higher levels of paste dispensing work, equipment other than the paste dispensing system is required. Peripheral equipment, such as storage hoppers, corrosion pits, and well-sealed cellars with large pockets are all essential. Some of the latest features of the company's equipment include:

Normal > l