The packaging process includes major processes such as filling, wrapping, and sealing, as well as related processes such as cleaning, stacking, and disassembling. In addition, the packaging also includes the steps of metering or stamping the package. The use of mechanical packaging products can increase productivity, reduce labor intensity, adapt to the needs of large-scale production, and meet the requirements of cleanliness and hygiene.
Mainly introduce the following points:
1. When the equipment is working, the film material is easy to be displaced and cannot be fed properly. How to adjust?
Answer: In the case of film offset in the equipment, if the adjusted film roll position and tension balance bar are invalid, the problem can be solved by adjusting the angle of the upper triangular plate. If the upper layer film material deviates from the clamping chain, the upper triangular plate can be adjusted clockwise; the following layer film material is offset from the clamping material chain, and the upper triangular plate can be adjusted counterclockwise.
Second, the packaging of 6 bottles of packaging bundles, the electric eye can not detect the packaging, the machine is easy to cut into the packaging, how to adjust?
A: The gap between the bundles of the bottles will affect the detection of the electric eye. At this time, the horizontal electric eye detection angle can be adjusted to be an oblique angle. After adjustment, the probability of detecting gaps in the package by the electric eye can be reduced, thereby avoiding chaos in the work.
Third, the shrinking machine is slowly heating or can not rise to a higher temperature (above 160 degrees Celsius) What is the reason?
Answer: The heater's line is the main power line through a magnetic switch and then to the heating pipe, so you should first detect whether the magnetic switch contacts are normal. If the line does not pass one of the phases, the above phenomenon will occur. If the magnetic pick-up switch is normal, check the meter again to see if the ohms of each phase and the machine are the same. If normal should be a short circuit. If all phases are on but the line or heater is still abnormal, the heater must be replaced.
Roller Blinds has two style that Motorized and Manual. The fabric style and Openness can be choose by yourself. It is can be keep warm and energy saving: In the Winter, you can open whole Roller Blinds during the daytime. Ensure the Max Light enter the room.Raise the air temprature of indoor. It is also a good protective screen to prevent the cold wind at night. Saving heating energy consumption. In the Summer, can regulate the amount of incident sunlight through the Roller Blinds System. Reduce the heat enter, coupled with natural ventilation, reduce cooling load. High strength, high density material, It is can't open from outside when the shutter closed to protect personal privacy, improve the quality of lift. Soundproof and noise reducing. if you prefer a look that`s sleek and neat, consider a Roller blind. These can be made with clever blackout coatings that effectively help to block out the light for a perfect night`s rest.
Roller Blinds
Cordless Roller Blinds,Blackout Roller Blinds,Light Filter Roller Blinds,L Shape Valance Roller Blinds
Dongguan Xindayuan Window Covering Products Co., Ltd. , http://www.xyndaxchina.com