Aging test equipment maintenance and maintenance

As the products are subjected to more and more complex environmental conditions. Only by reasonably specifying the environmental conditions of the product and properly selecting the product's environmental protective measures can the product be protected from damage during storage and transportation, and be safe and reliable during use. Therefore, the aging test equipment for artificial simulation of the product's environmental testing is an important part of ensuring its high quality. The maintenance of the equipment is beneficial to the extension of its service life, which is more conducive to product testing and guarantees its quality. Kunshan Haida Instrument Engineer proposed the following

Maintenance and maintenance points:

1. The laboratory maintains a dry environment;

2. Absolutely prohibit the setting temperature from exceeding the maximum temperature specified by this equipment;

3, keep the appearance of the box clean; avoid dust intrusion into the box;

4, to avoid external forces hit the box;

5. Prohibit chemical exposure to the equipment;

6. The equipment's wastewater discharge system must be installed in place;

7, after the end of the test, the whole power off;

8. After the end of each test, the sample should be taken out and the equipment liner should be cleaned;

9. Whether the power cord is properly connected according to the specifications and is indeed grounded;

10, check whether the over-temperature protector has been set (the factory has been adjusted, generally do not need to adjust);

11, ventilation fans should be installed in the laboratory to maintain indoor ventilation;

12. Check the circuit control system before each boot.

13, UV aging test box power and ground wire confirmation;

14, when the spray test should pay attention to observe the water level of the tank, timely replenish pure water;

15. Non-professionals are prohibited from operating this equipment.